48
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condi-
tion before operating increases the risk of an accident. Always inspect
the vehicle before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 35
107
Brake fluid Ensure proper level 108
Front suspension Inspect, lubricate if necessary 82
Rear suspension Inspect, lubricate if necessary 82
Steering Ensure free operation 110
Tires Inspect condition and pressure 10
115
Wheels/fasteners Inspect, ensure fastener tightness 115
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 40
85
Coolant level Ensure proper level 100
99
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 105
Indicator lights/switches Ensure proper operation 33
Air filter, pre-filter Inspect, clean 103
Headlamp Check operation, apply POLARIS
dielectric grease when lamp is
replaced
117
Brake light/tail lamp Check operation, apply POLARIS
dielectric grease when lamp is
replaced
119
Seat Latches Push down on both seat backs to
ensure the latches are secure
27
Seat Belts Check length of belt for damage,
check latches for proper operation
31
Cab Nets Check for wear or damage, ensure
proper installation
30
To Next Page
Loading...
Need help?
General
