55
OPERATION
Driving on Slippery Surfaces
When driving on slippery surfaces such as wet trails, loose gravel, or
ice, be alert for the possibility of skidding and sliding.
Follow these precautions when encountering slippery conditions:
1. Slow down before entering slippery areas.
2. Maintain a high level of alertness, reading the trail and avoiding
quick, sharp turns, which can cause skids.
3. Engage all-wheel drive before wheels begin to lose traction.
NOTICE: Severe damage to the drive train may occur if the AWD is engaged
while the wheels are spinning. Always allow the wheels to stop
spinning before engaging AWD.
4. Correct a skid by turning the steering wheel in the direction of the
skid. Never apply the brakes during a skid.
Sideways
skid
Turn in
direction of
skid
To Next Page
Loading...
Need help?
General
