BRAKE FLUID
Change the brake fluid
every two years and any
time the fluid becomes
contaminated, the fluid
level is below the
minimum, or if the type and
brand of the fluid in the
reservoir are unknown.
Access the brake fluid
reservoir through the left
front wheel well.
1. Position the vehicle on a level surface.
2. Place transmission in park and turn off engine.
3. View the brake fluid level in the reservoir, located in the front driver-side
wheel well. The level should be between the maximum and minimum level
lines.
4. If the fluid level is lower than the lower level line, add brake fluid to the upper
line.
5. Apply the brake forcefully for a few seconds and check for fluid leakage
around the fittings.
120
MAINTENANCE
To Next Page
Loading...
Need help?
General
