RIDE COMMAND DISPLAY (IF EQUIPPED)
BEFORE YOU RIDE
WARNING
Failure to pay attention to operating your vehicle could result in loss of control,
injury, or death. Always concentrate on riding. Do not enter information while
operating your vehicle. Some features are limited when vehicle is in motion.
Before riding with your new display, do the following:
• Download the Polaris RIDE COMMAND App from the Apple®/Google Play®
store and create your personalized account.
• Check your display to ensure you have the appropriate maps and trails visible
for your area. To change or update maps/trails see page 76.
• Trails change often, and the trail data file is only considered valid for 90 days
after the release date. Please keep your trail data up to date. Download the
latest trails at http://ridecommand.polaris.com.
NOTICE
Using the display for an extended period of time while the vehicle’s engine is
off can drain the battery.
VEHICLE-TO-VEHICLE COMMUNICATION (V2V)
IMPORTANT
For applications that use vehicle-to-vehicle (V2V) communication, radio
transmitter IC: 5966A-P001 has been approved by Innovation, Science and
Economic Development Canada (ISED) to operate with the Polaris antenna
(part number 4018713) with gain of 3 dBi. Any antenna that has a gain greater
than 3 dBi is prohibited for use with this device.
DEVICE OPERATING REQUIREMENTS
Phone functionality is dependent on the capabilities of your cell phone.
NOTICE
Some cell phones or operating systems will not work as shown in this manual.
65
RIDE COMMAND DISPLAY (IF EQUIPPED)
To Next Page
Loading...
Need help?
General
