FRONT / REAR SHOCK COMPRESSION
ADJUSTMENT (NON-DYNAMIX VEHICLES)
The compression damping clicker knob is located at the top of the shock
reservoir.
1. Turn the clicker clockwise to
increase compression
damping.
2. Turn the clicker counter-
clockwise to decrease
compression damping.
LOCATION DEFAULT CLICKER POSITION
Front 8/16 clicks
Rear 8/16 clicks
TIRES
WARNING
Improper tire maintenance can lead to loss of control and an accident, which
could result in serious injury or death. To reduce your risk of injury:
• Maintain POLARIS recommended tire pressure. Check pressure before
operating. Even if your vehicle has only been driven a short distance, the tire
pressure readings can be higher.
• Make sure tire pressure is even across all four tires.
• Only use the size and type of tires specified for this vehicle.
• Do not operate your vehicle with worn or damaged tires.
• Always follow your tire manufacturer’s instructions for maintenance
WARNING
Improperly installed wheels can separate from the vehicle, which can result in
serious injury or death. Improper wheel installation can also adversely affect
tire wear and vehicle handling. Always ensure that all wheel nuts are tightened
to torque specification. Re-check wheel nut torque 25 miles after installation.
125
MAINTENANCE
To Next Page
Loading...
Need help?
General
