SWITCHES
IGNITION SWITCH
The ignition switch
q
is a four-position, key-operated switch. Use the ignition
switch to start the engine. See the Starting the Engine section for starting
procedures.
POSITION FUNCTION
OFF
The engine is off. Electrical circuits are off, except
accessory 12V.
ACCESSORY
The engine is off. Powers the display, terminal block,
and front/rear accent lights. Check engine and power
steering warning indicators will appear on the display in
this mode but will turn off when the vehicle is started if
no issues are present.
ON
Electrical circuits are on. Electrical equipment can be
used.
START
The vehicle must be in PARK or NEUTRAL before the
engine can start. To start the vehicle, press the brake
pedal, turn the key to the start position, and then
release. The engine will turn over for about 5 seconds
or until started.
The key can be removed from the switch when it is in the OFF position.
30
FEATURES AND CONTROLS
To Next Page
Loading...
