PUTTING ON THE HARNESS
To prepare the rider:
1. Do not wear heavy clothing that may interfere with proper fit of the harness.
Make sure there are no rigid or breakable items (e.g., eye glasses, pens,
jewelry, keys) under the harness.
2. Before entering the vehicle, your helmet should be off, but accessible from
the seat.
3. Adjust the seat to the desired position.
4. Unbuckle the harness and loosen all manually adjustable belts:
• Lap belts
• Thigh belts (equipped on 6-pt harnesses)
• Shoulder belts (not adjustable on retractable 6-pt harness)
How to use the red straps and tilt-lock feature to tighten and loosen the
belts:
When the tilt-lock is down
q
, the belt resists being tightened or loosened. The
red straps are provided so that you can lift the tilt-lock to the up position
w
and
unlock it so that you can pull the seat belt through. To tighten or loosen a belt,
grasp the red strap and pull up on the red strap in one hand and pull the belt with
the other. Adjust the angle of the tilt-lock until the belt pulls more easily.
q
Down, locked position
w
Up, unlocked position
45
FEATURES AND CONTROLS
To Next Page
Loading...
