EVERY 50 HOURS / 1000 MILES (3200 KM) OR YEARLY FOLLOWING
INITIAL BREAK-IN SERVICE
Cooling System
Fluid level inspection; inspect for fluid leaks;
add coolant if needed. Inspect coolant strength
seasonally; pressure test system yearly.
Wheel Bearings Inspect; replace as needed.
Parking Brake (if
applicable)*
Inspect; adjust as needed.
Fuel System*
Cycle key to pressurize fuel pump; check for
leaks at fuel system connections, check for
leaks at fill cap.
Intake Ducts
Inspect ducts for proper sealing / air leaks.
Shift Cable/Linkage Inspect; adjust as needed.
Wrap Under Suspension
and Steering Components/
Alignment
Inspect; replace as needed.
* Have an authorized Polaris dealer or other qualified person perform these
services.
88
MAINTENANCE
To Next Page
Loading...
