Polaris RZR PRO XP 2020 User Manual

6.46
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.
3. Re-install the retaining fasteners
t
and movable
sheave
y
onto the helix
u
using previous hole
orientation.
IMPORTANT
Using previous hole orientation will ensure the driven
clutch maintains balance.
4. Using clutch compressor PU-50518 compress the
driven clutch assembly.
CAUTION
The helix cover is loaded by the spring. Not using a
proper compressor may result in personal injury or
damage to the clutch.
5. Torque the fasteners
i
to specification.
TORQUE
Helix Fasteners:
44 ft-lbs (60 Nm)
6. Once back together, verify the alignment marks made
during disassembly are properly aligned.
7. Install the stationary and movable sheave on the
vehicle. See Driven Clutch Installation.
PVT SYSTEM

Polaris RZR PRO XP 2020 Specifications

General

Brand	Polaris
Model	RZR PRO XP 2020
Category	Offroad Vehicle
Language	English