EUROPEAN VIBRATION AND NOISE
The driver-perceived noise and hand/arm and whole body vibration levels of this
machinery is measured per EN 15997.
The operating conditions of the machinery during testing:
The vehicles were in like-new condition. The environment was controlled as
indicated by the test procedure(s).
The uncertainty of vibration exposure measurement is dependent on many
factors, including:
• Instrument and calibration uncertainty
• Variations in the machine such as wear of components
• Variation of machine operators such as experience or physique
• Ability of the worker to reproduce typical work during measurements
• Environmental factors such as ambient noise or temperature
VEHICLE IDENTIFICATION NUMBERS
Record your vehicle’s identification number
q
, engine serial number (stamped
on engine), and key number (stamped on key) in the spaces provided. Remove
the spare key and store it in a safe place. An ignition key can be duplicated only
by ordering a POLARIS key blank (using your key number) and mating it with
one of your existing keys. The ignition switch must be replaced if all keys are
lost.
Vehicle Model Number:
Vehicle Identification Number:
Engine Serial Number:
Key Number:
9
INTRODUCTION
To Next Page
Loading...
