FRONT / REAR SHOCK COMPRESSION
ADJUSTMENT
The compression damping clicker knob on the front shocks is located at the top
of the shock reservoir
q
. For the rear shocks, the clicker knob is located directly
below the shock reservoir
w
.
To adjust the compression dampening, do the following:
1. Turn the clicker clockwise to increase compression damping.
2. Turn the clicker counter-clockwise to decrease compression damping.
Shock Compression Settings
Model Location
Factory Clicker Position
RZR RS1 Front 8/16 clicks
Rear 8/16 clicks
124
MAINTENANCE
To Next Page
Loading...
