EUROPEAN VIBRATION AND NOISE
The driver-perceived noise and hand/arm and whole body vibration levels of this
machinery is measured per EN 15997.
The operating conditions of the machinery during testing:
The vehicles were in like-new condition. The environment was controlled as
indicated by the test procedure(s).
The uncertainty of vibration exposure measurement is dependent on many
factors, including:
• Instrument and calibration uncertainty
• Variations in the machine such as wear of components
• Variation of machine operators such as experience or physique
• Ability of the worker to reproduce typical work during measurements
• Environmental factors such as ambient noise or temperature
VEHICLE IDENTIFICATION NUMBERS
Record your vehicle’s identification number
q
, engine
serial number
w
, and key number
e
in the spaces
provided. Remove the spare key and store it in a safe
place. An ignition key can be duplicated only by
ordering a POLARIS key blank (using your key
number) and mating it with one of your existing keys.
The ignition switch must be replaced if all keys are
lost.
Vehicle Model Number:
Vehicle Identification Number:
Engine Serial Number:
Key Number:
8
INTRODUCTION
To Next Page
Loading...
