FOX® SHOCK COMPRESSION ADJUSTMENT
(IF EQUIPPED)
The compression damping clicker knob is located at the top of the shock
reservoir.
1. Turn the clicker clockwise to increase compression damping.
2. Turn the clicker counter-clockwise to decrease compression damping.
FACTORY PRELOAD SETTINGS
Setting Compression Damping
Softest Full counter-clockwise position (24 clicks)
Factory Center position (12 Clicks)
Firmest Full clockwise position (0 clicks)
WARNING
Uneven adjustment may cause poor handling of the vehicle, which could result
in an accident. Always adjust both the left and right spring preloads equally or
have your POLARIS dealer/authorized person perform the adjustments.
169
MAINTENANCE
To Next Page
Loading...
