FILTER SYSTEMS
INTAKE PRE-FILTERS
The engine intake pre-filter
q
is
located on the right side of the
vehicle. The clutch air intake
w
is located on the left side of the
vehicle.
IMPORTANT
Ensure there are no obstructions on either side of the pre-filters, including
obstructions caused by items stored in the cargo box.
Inspect the engine pre-filter before each use of the vehicle to ensure adequate
air flow. If necessary, remove the pre-filter and clean with soapy water. Dry with
low pressure compressed air.
Periodically inspect the clutch (PVT) air intake for debris and clean as needed to
ensure adequate air flow.
TIP
When washing the vehicle, always avoid spraying water directly toward the
PVT intake duct and engine air intake. See the Washing the Vehicle section for
recommended washing procedures.
135
MAINTENANCE
To Next Page
Loading...
