LUG WRENCH
The passenger hand hold can be used as an adjustable lug nut wrench with 18
mm and 19 mm sockets.
To remove the lug nut wrench, do the following:
1. Release the lever lock by rotating downward
q
.
2. Remove the pin
w
.
3. Pull the lug nut wrench out.
To reinstall the lug nut wrench, do the following:
1. Place the lug nut wrench back and adjust to desired position.
2. Put the pin through the lever lock
w
.
3. Close the lever lock
q
by rotating upwards.
4. Ensure the adjustment lock
e
is fully locked.
49
FEATURES AND CONTROLS
To Next Page
Loading...
