Polaris RZR XP 1000 User Manual

SUSPENSION SETTINGS
FRONT / REAR SHOCK COMPRESSION
ADJUSTMENT
The compression damping clicker knob is located at the top of the shock
reservoir.
1. Turn the clicker clockwise to increase compression damping.
2. Turn the clicker counter-clockwise to decrease compression damping.
Shock Compression Settings
Model Location Clicker Position
All Models with Walker
Evans Racing® Shocks
Front 8/16 clicks
Rear 8/16 clicks
FRONT / REAR SPRING PRELOAD ADJUSTMENT
The factory setting is appropriate for nearly all riding conditions. If desired, the
suspension may be adjusted to maintain vehicle clearance height when carrying
loads.
To adjust the preload, do the following:
1. Elevate the vehicle to allow the suspension to fully extend.
2. Turn the adjusting ring to the left to add preload. Turn the adjusting ring to the
right to remove preload.
WARNING
Uneven adjustment may cause poor handling of the vehicle, which could result
in an accident. Always adjust both the left and right spring preloads equally or
have your POLARIS dealer or qualified person perform the adjustments.
142
MAINTENANCE

Polaris RZR XP 1000 Specifications

General

Brand	Polaris
Model	RZR XP 1000
Category	Offroad Vehicle
Language	English