EasyManua.ls Logo

Polaris RZR XP 1000 - Brake System Maintenance

Polaris RZR XP 1000
193 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5. Inspect the air filter
w
and air box for dirt, debris or water.
6. To remove the filter, slide the filter toward the passenger's side of the vehicle.
7. With the filter removed, clean the intake tube and air box thoroughly. Wipe
well with a clean, dry cloth.
NOTICE
Dirt or debris in the intake tube could result in severe engine damage. Always
clean all dirt and debris from the intake tube before installing the filter.
8. Reinstall the air filter (if clean) or install a new air filter (if soiled). Do not
attempt to clean the air filter.
NOTICE
Use of a non-POLARIS-approved air filter may cause engine damage. Always
use a POLARIS-approved replacement filter. Replacement filters are available
at your POLARIS dealer.
9. Make sure that there are no gaps between the filter, the filter ring and the
stop on the intake tube.
10.Reinstall the air box cover and ensure the alignment tabs are properly
positioned.
11. Secure the five (5) cover clips.
12.Reinstall the access panel.
13.Reinstall seats.
137
MAINTENANCE

Other manuals for Polaris RZR XP 1000

Related product manuals