BRAKES
WARNING
Operating the vehicle with a spongy brake pedal can result in loss of braking,
which could cause an accident resulting in severe injury or death. Never
operate the vehicle with a spongy-feeling brake pedal.
The front and rear brakes are hydraulic disc type brakes activated by the brake
pedal.
CAUTION
Brake discs can become extremely hot after operation. Allow the discs to cool
before performing maintenance to prevent risk of burns.
Always check brake pedal travel and the brake fluid reservoir level before each
use of the vehicle. When applied, the brake pedal should feel firm. Any
sponginess would indicate a possible fluid leak or low brake fluid level, which
must be corrected before riding. See the Brake Fluid section for further details.
If you discover any irregularities in brake system operation, including excessive
pedal travel, contact your dealer for proper diagnosis and repairs.
BRAKE INSPECTION
WARNING
Do not apply WD-40® or any petroleum product to brake discs. These types of
products are flammable and may also reduce the friction between the brake
pad and caliper.
1. Check the brake system for
fluid leaks.
2. Check the brake pedal for
excessive travel or a spongy
feel.
3. Check the friction pads for
wear, damage and
looseness.
139
MAINTENANCE
To Next Page
Loading...
Need help?
General
