SEAT ADJUSTMENTS
SEAT ADJUSTMENT
On seats equipped with an
adjustment lever
q
under the
front edge of the seat, pull the
lever to the left. Slide the seat
forward or rearward to the
desired position. Release the
lever. The seat will lock into the
new position.
SEAT REMOVAL
To remove the seat, do the
following:
1. Pull up on the seat latch
strap
q
located at the base
of the seat.
2. Tilt the seat forward and
move it rearward.
3. Lift the seat upward to
remove it from the vehicle.
4. Align the base to reinstall the seat. Make sure the seat tabs at the front edge
of the seat slide onto the seat retainer tubes.
5. Press down firmly at the rear of the seat to engage the rear latches.
43
FEATURES AND CONTROLS
To Next Page
Loading...
