INDICATOR LAMPS
INDICATOR ICON FUNCTION
Vehicle Speed
When standard mode is selected, speed
displays in miles per hour.
When metric mode is selected, speed displays
in kilometers per hour.
Check Engine
This indicator appears if a fault occurs. Do not
operate the vehicle if this warning appears.
Serious engine damage could result. Your
authorized POLARIS dealer can assist.
Chassis Warning
If a fault condition is detected, the light will
remain on as long as the condition exists.
Retrieve the error codes for diagnosis. This
lamp is also known as an Amber Warning
Lamp (AWL).
EPS Warning (if
equipped)
This indicator illuminates briefly when the key
is turned to the ON position. If the light remains
on, the EPS system is inoperative. See your
POLARIS dealer, or other qualified person, as
soon as possible for repair. Continued
operation could result in permanent damage to
the EPS unit and increased steering effort. For
more information, see the Electronic Power
Steering (EPS) section.
Engine Hot
This lamp illuminates to indicate an overheated
engine. If the indicator flashes, the overheating
condition remains, and the system will
automatically reduce engine power.
Check Battery
This warning usually indicates that the vehicle
is operating at an RPM too low to keep the
battery charged. It may also occur when the
engine is at idle and high electrical load (lights,
cooling fan, accessories) is applied. Drive at a
higher RPM or recharge the battery to clear the
warning.
68
FEATURES AND CONTROLS
To Next Page
Loading...
Need help?
General
