ACCESSING MENUS AND OPTIONS
GAUGE SETTINGS MENU
Press and release the MODE button to cycle through the Area 1 modes until the
desired default mode displays. See the Mode Information Displays section for
details.
Press and hold the MODE button to enter the settings menu.
The OPTIONS screen will display for a few seconds.
1. Press and release either toggle
button to cycle to the desired option.
2. Press MODE to select the option.
3. Press either toggle button to cycle to
the desired setting.
4. Press MODE to save and exit to the
settings menu.
5. Press and hold the MODE button to
exit the settings menu.
BACKLIGHT COLOR
The information center backlight can be
set to either blue or red.
1. Press and hold the MODE button to
enter the settings menu.
2. Press either toggle button to cycle to
the “BL COLOR” option. Press
MODE to select.
3. Press either toggle button to cycle to
the desired setting.
4. Press MODE to save and exit to the
settings menu,
72
FEATURES AND CONTROLS
To Next Page
Loading...
Need help?
General
