Polaris S100 Quick Guide

Polaris Connect App Setup
Base Radio Setup
Rover Radio Setup
After Polaris Connect
App has been setup for
both base radio and
rover radio, the S100
rover will be able to
receive S100 base data
transmitted over radio.
Polaris Connect App
will exist after setting
up the Base Radio.
Polaris Connect App
stays after setting up
the Rover Radio. One
can keep Polaris
Connect App running in
background and use 3
rd
party GIS App.
If want to log base
RTCM data for PPP
processing, do page-8
procedures before
above #3 Press Start.
Setup Base Position:
Go Base page,
1
2
1
2
Set Position by
survey duration
Or Set Position by
entering coordinates
manually
3
3
Press Start,
start to broadcast
If Base position is set by
Automatic Survey, one can
check coordinates on the
S100 Rover on the Rover
page

Polaris S100 Specifications

General

Brand	Polaris
Model	S100
Category	Radio
Language	English