Polaris S100 - 3 Preparing for First-Time Use; 3-1 Install Polaris Connect App; 3-2 Install USB Driver; 3-3 Check S100 Receives Satellite Signal

Multiple Rover Application
In this case, Only needs One Base to broadcast RTCM data, sending
RTCM data to One or More Rover.
1. Setup all S100 Radio with same net ID (see page-5 & 6)
2. Setup Base (see page-3 & 4)
3. Setup Rover (see page-3 & 4)
Base
1
2
Rover
2
Rover
2
Rover
1
2
Base Radio
Rover Radio