Need help?Do you have a question about the Polaris S100 and is the answer not in the manual?
Basic introduction to the S100 RTK receiver and its positioning capabilities.
Key operational guidelines for achieving centimeter-level RTK accuracy.
Detailed features of the S100 RTK receiver, including satellite support and interfaces.
Steps to install the Polaris Connect Android application for the S100.
Instructions for installing the necessary USB driver for S100 firmware updates.
Procedure to verify the S100's ability to receive satellite signals.
Using S100 as a Bluetooth RTK rover with the Polaris Connect app's NTRIP client.
Using S100 as a Bluetooth RTK rover with external NTRIP client applications.
Steps to configure and operate the S100 as a USB RTK rover.
How to prepare logged data for Post-Processed Kinematic (PPK) calculations.
How to prepare logged data for Precise Point Positioning (PPP) services.
Procedures for logging and downloading raw measurement data from the S100.
Guide to checking and performing updates for the S100 Viewer software.
Instructions for updating the firmware of the S100 RTK receiver.
Steps to update the firmware for the S100's Bluetooth module.
Detailed description of additional usage scenarios for the S100 RTK receiver.
Information on other RTK operations, including NTRIP services.
Procedure for configuring the RTK license for the S100 receiver.
Steps to report issues and collect data for analysis if problems arise.
To Next Page
General