Polaris S100 User Manual

19
5-3 Obtaining Log Data from S100
A tutorial video showing the process of downloading S100 log files can be found here:
https://youtu.be/YlYX_bUfmjM
The steps to generate, access, and manage log data with S100 are described below.
To generate log data of base and rover, follow below steps.
1. In rover or base tab, click the black REC button to start S100 to record raw measurement data in its
flash memory. See Figure 5-4 a, b.
2. When S100 start to record raw measurement data, the REC button becomes red and flicks. See
Figure 5-4 c.
3. Click red REC button again to stop recording.
a b c
Figure 5-4

Polaris S100 Specifications

General

Brand	Polaris
Model	S100
Category	Radio
Language	English