50
A-4 Problem Reporting
In the rare case that connection is made to 3rd party RTK base, but unable to get RTK Fix, only getting
RTK Float, follow the procedure steps shown in this video https://youtu.be/LG2qDGSrpYY to
simultaneously log 15 minutes of (1) RTK base RTCM data and (2) S100 raw measurement data for us
to analyze the issue. Upload the two log files to your Google Drive folder and send us a shareable link
to info@polaris-gnss.com.
The steps are
1. Select Rover (bottom screen) -> Settings in Bluetooth Rover with NTRIP Client. See Figure A-11 a.
2. Select Debug Mode than press Save Data button. See Figure A-11 b.
3. Press Start. See Figure A-11 c.
a b c
Figure A-11
To Next Page
Loading...
Need help?
General