Polaris SLT780 1996 User Manual

Boarding And Starting In Deep Water (Operator Only)
Watercraft engine must be turned
off.
1. Swim to the rear of the
watercraft. Grip the handle
on the rear of the seat and pull
yourself up on the floor,
kneeling on the footrest. The
seat strap will aid in boarding.
2. Move up to the seat and
straddle it.
3. Attach the lanyard lock plate
to the engine stop switch and
see that the lanyard wrist
band is secure on your left
wrist.
4. Pull the choke knob all the
way out. If the engine is
already warm do not use the
choke.
5. Push the starter switch with
your left hand while
squeezing the throttle with
your right hand.
6.
As soon as the engine starts, release the starter switch and throttle.
enough throttle should be applied to keep the engine running.
7.
Ease the throttle open and be prepared for acceleration.
Only

Polaris SLT780 1996 Specifications

General

Manufacturer	Polaris
Model	SLT780
Year	1996
Category	Boat
Type	Personal Watercraft
Engine Type	2-stroke
Cylinders	3
Cooling System	Water-cooled
Starting System	Electric
Width	47 inches
Seating Capacity	3
Hull Material	Fiberglass
Fuel Delivery	Carburetor