What gear should I use on my Polaris Sportsman 500 EFI Offroad Vehicle when climbing over large objects?
When climbing over large objects from a stopped position with your Polaris Offroad Vehicle, shift the transmission to low range and carefully use fast, brief, aggressive throttle application to engage the clutch. Be careful because excessive throttle may cause loss of control and vehicle overturn.
What to do when driving a Polaris Sportsman 500 EFI Offroad Vehicle at low RPM or low speed?
When driving your Polaris Offroad Vehicle at low RPM or low ground speed (approximately 3-7 MPH), drive at a higher speed or use low range more frequently. The use of low range is highly recommended for cooler PVT operating temperatures and longer component life.
How should I properly break-in a new belt on my Polaris Offroad Vehicle?
Always break in a new belt and/or clutch on your Polaris Offroad Vehicle by avoiding aggressive or high-speed operation during the first two full tanks of fuel.
What type of belt should I use on my Polaris Sportsman 500 EFI Offroad Vehicle?
Always use the recommended belt for your Polaris Offroad Vehicle.
Why is my Polaris Sportsman 500 EFI Offroad Vehicle having poor engine performance?
Poor engine performance in your Polaris Offroad Vehicle can be caused by a fouled plug or foreign material in the gas tank or fuel lines. It is recommended to have your dealer check it.
How to prevent slippage from failure to warm up belt on a Polaris Offroad Vehicle?
To prevent slippage from failure to warm up the belt on your Polaris Offroad Vehicle, always warm up the belt by operating below 30 mph for one mile (5 miles or more when the temperature is below freezing).
What should I do if the belt is slipping on my Polaris Sportsman 500 EFI due to water or snow?
If your Polaris Offroad Vehicle experiences belt slippage from water or snow ingestion into the PVT system, shift the transmission to neutral. Using the throttle, vary the engine RPM from idle to full throttle. Repeat several times as required.
How to tighten loose solenoid connections on a Polaris Sportsman 500 EFI Offroad Vehicle?
If you have loose solenoid connections on your Polaris Offroad Vehicle, check all connections and tighten them.
How to handle old or non-recommended fuel in my Polaris Offroad Vehicle?
If you have old or non-recommended fuel in your Polaris Offroad Vehicle, replace it with new fuel.
What to do if there is water in the fuel of my Polaris Sportsman 500 EFI?
If water is present in the fuel of your Polaris Offroad Vehicle, drain the fuel system and refuel.
General| Brand | Polaris |
|---|---|
| Model | Sportsman 500 EFI |
| Category | Offroad Vehicle |
| Language | English |
Explains warning decals and their placement on the ATV for protection.
Recommends appropriate protective clothing for ATV riding for comfort and injury reduction.
Essential safety precautions and responsibilities for ATV operators, including age restrictions.
Describes the function of various electrical switches like engine stop and worklight.
Explains how to use the throttle lever and the Electronic Throttle Control (ETC) system.
Explains the operation of headlight and taillight switches for visibility.
Describes how to use the brake lever and necessary checks before riding.
Details checking the brake fluid level in the master cylinder for proper function.
Explains how to set and release the parking brake and important safeguards.
Describes the auxiliary brake system and its operation as a backup.
Information about the fuel tank and recommended fuel type for the ATV.
Details on fuel filter replacement and maintenance to ensure proper fuel delivery.
Explains the gear selector positions and procedures for changing gears.
Explains the operation and engagement of the All Wheel Drive system.
Overview of the instrument cluster, rider information center, and diagnostic modes.
Safety precautions for handling gasoline and understanding engine exhaust hazards.
Procedures for breaking in the new engine and drivetrain for optimal performance.
Checklist for pre-ride inspection of the ATV components to ensure safe operation.
Step-by-step guide for starting the ATV engine safely, including warm-up.
Guidelines for safely hauling cargo on the ATV, including weight distribution.
Basic steps for safely operating and driving the ATV on level surfaces.
Technique for making safe turns with the ATV, considering the solid rear axle.
Precautions for riding on slippery or loose surfaces to maintain control.
Precautions and techniques for safely driving uphill, including weight transfer.
Safety precautions for sidehilling on slopes to avoid overturn.
Precautions for safely driving downhill, including weight transfer and braking.
Procedure for turning the ATV around on a hill if it stalls.
Procedures for safely driving the ATV through water and post-operation checks.
Tips for safely driving over obstacles, emphasizing awareness.
Precautions for safely operating the ATV in reverse, including checks and speed.
Procedures for safely parking the ATV on an incline if unavoidable.
Guidelines for modifying noise emission components to ensure compliance.
Regulations for operating on public lands in the USA, including spark arrestor.
Explains the function of the crankcase emission system and blow-by gas recirculation.
Details exhaust emissions control via EFI and engine design.
Compliance with electromagnetic interference standards for the vehicle.
Details the maintenance schedule for the ATV based on hours, calendar, and miles.
Provides a guide for lubricating vehicle components with recommended lubricants.
Details the recommended engine oil for the ATV and its properties.
Instructions for checking and maintaining engine oil level correctly.
Steps for changing the engine oil and filter at specified intervals.
Instructions for checking and changing transmission oil.
Procedures for checking and changing front gearcase oil.
Details on checking and maintaining radiator coolant level and system.
Checks and maintenance for the brake system, including fluid and pad wear.
Procedure to check vehicle toe alignment; dealer adjustment recommended.
Information on when to replace tires based on tread depth measurement.
Steps for removing a vehicle wheel, including safety precautions.
Steps for installing a vehicle wheel and required torque specifications.
Instructions for servicing the air filter and pre-filter for engine health.
General information about ATV lights and maintenance, including replacement.
Information on spark plugs, condition, and replacement for engine performance.
Procedures for dealing with vehicle immersion in water to prevent damage.
Instructions for servicing the spark arrestor to maintain efficiency.
Explains the Polaris PVT system operation, maintenance, and usage guidelines.
General information about ATV batteries, maintenance, and safety.
General advice on cleaning and storing the ATV to extend component life.
States that camber and caster adjustments are not possible on this vehicle.
How to adjust the rear shock absorber spring tension for rider preference.
Procedure for adjusting handlebar height for rider preference and comfort.
Procedure for adjusting throttle cable freeplay at the handlebar for proper operation.
Lists possible causes and solutions for common drive belt and cover issues.
Possible causes and solutions when the engine fails to turn over.
Causes and solutions when the engine turns but does not start.
Possible causes and solutions for engine backfiring.
Causes and solutions for engine pinging or knocking noises.
Troubleshooting for irregular engine running, stalling, or misfires.
Causes and solutions for the engine stopping or losing power.
Possible causes and solutions for engine overheating.
Key physical and capacity specifications for the ATV model.
Details on engine, ignition, lubrication, and drivetrain components.
Specifications for tires, brakes, and related systems.
Details clutch specifications based on altitude for optimal performance.
Outlines the limited warranty terms, coverage, and duration for the vehicle.
Explains the warranty registration process and requirements for validity.
Details warranty exclusions, limitations of remedies, and terms.
Instructions on how to obtain warranty service from an authorized dealer.
Policy regarding warranty coverage for vehicles sold or serviced outside their country of purchase.
Details the limited warranty for emissions control systems and components.
To Next Page