77
MAINTENANCE
Cooling System
Radiator Coolant
To ensure that the coolant maintains its ability to protect the engine,
Polaris recommends that you drain the system completely every two
years and add a fresh mixture of antifreeze and water.
Replace the coolant any time the cooling system has been drained for
maintenance or repair. If the recovery bottle has run dry, check the level
in the radiator. Add coolant as needed.
CAUTION! Escaping steam can cause burns. Never remove the pressure cap
while the engine is warm or hot. Always allow the engine to cool before
removing the pressure cap.
1. Open the front box cover
and pull open the access
door.
2. Remove the pressure cap.
3. Using a funnel, slowly add
coolant through the radia-
tor filler neck.
4. Reinstall the pressure cap.
Use of a non-standard pres-
sure cap will not allow the
recovery system to func-
tion properly. Contact your
dealer for the correct replacement part.
5. Secure the access door.
6. Secure the box cover.
To Next Page
Loading...
Need help?
General
