4X4 SWITCH
Use the 4X4 switch to engage ADC 4X4, 4X4 or 2X4. The vehicle automatically
engages 4X4 when operating in reverse if the switch is set to either 4X4
position.
ENGINE STOP SWITCH
Move the stop switch
q
either left or
right to the OFF position to stop the
engine quickly.
Move the stop switch to the RUN
position before attempting to start the
engine. The engine will not start or run
when the switch is off.
Both the main switch and the engine
stop switch will shut off all electrical
power to the vehicle, including lights.
MAIN KEY SWITCH
Use the main key switch to start the engine.
HEADLIGHT SWITCH
Use the headlight switch to turn the lights on and off and to change the lights
from high beam to low beam. The key must be in the ON position and the engine
stop switch must be in the RUN position.
28
FEATURES AND CONTROLS
To Next Page
Loading...
Need help?
General
