IGNITION SWITCH/LIGHT SWITCH
Use the ignition switch to start the engine and to turn the lights on or off. The key
can be removed from the switch when it is in the OFF position.
OFF
Turn the key to the OFF
position to stop the engine.
Electrical circuits are off.
LIGHTS ON
The lights are on. Electrical
circuits are on. Electrical
equipment can be used.
LIGHTS OFF
The lights are off. Electrical
circuits are on. Electrical
equipment can be used.
START
Turn the key to the START
position to engage the
electric starter. See page 63
for starting procedures.
DRIVE MODE (AWD) SWITCH
The drive mode switch controls the All Wheel Drive (AWD/4X4) system. Use this
switch to engage AWD (4X4) or 2X4. The vehicle automatically engages 4X4
when operating in reverse if the drive mode is set to AWD (4X4).
See page 38 for drive mode (AWD) operating instructions.
29
FEATURES AND CONTROLS
To Next Page
Loading...
Need help?
General
