120
Maintenance
Constant Variable Transmission (CVT) System
Failure to comply with the instructions in this warning can result in severe injury or death.
Do not modify any component of the CVT system. Doing so may reduce its strength so that a failure
may occur at a high speed. The CVT system has been precision balanced. Any modification will cause
the system to be out of balance, creating vibration and additional loads on components.
The CVT system rotates at high speeds, creating large amounts of force on clutch components.
Extensive engineering and testing has been conducted to ensure the safety of this product. However,
as the owner, you have the following responsibilities to make sure this system remains safe:
• Always follow all recommended maintenance procedures. See your dealer as outlined in the owner's
manual.
• This CVT system is intended for use on POLARIS products only. Do not install it in any other prod-
uct.
• Always make sure the CVT housing is securely in place during operation.
To Next Page
Loading...
