34
FEATURES AND CONTROLS
All Wheel Drive (AWD) System
The All Wheel Drive system is controlled by the 4X4 (AWD) switch.
ADC 4X4 Mode (if equipped)
When the switch is on ADC 4X4,
the ADC system allows engine
braking to all six wheels when the
vehicle descends a hill or incline.
Always move the 4X4 switch to
ADC 4X4 before ascending or
descending a hill. See page 36.
AWD Mode
When the switch is on 4X4, the vehicle is in all wheel drive, and the
AWD indicator light in the instrument cluster will be on.
When in AWD, the demand drive unit will automatically engage any
time the rear wheels lose traction. When the rear wheels regain traction,
the demand drive unit will automatically disengage.
There is no limit to the length of time the vehicle may remain in AWD.
Tip: The override switch allows activation of AWD in reverse if the 4X4 switch is
on. See page 26.
2X4 Mode
When the switch is on 2X4, the middle and rear wheels drive at all
times.
To Next Page
Loading...
