81
MAINTENANCE
Cooling System
Radiator Coolant
Escaping steam can cause severe burns. Never remove the pressure cap while
the engine is warm or hot.
1. Open the front box cover.
2. Remove the access panel
screws. Squeeze the outer
edges of the panel inward to
remove the panel.
3. Remove the radiator pressure
cap.
4. If coolant is not visible,
slowly add coolant through
the radiator filler neck.
5. Reinstall the pressure cap.
Use of a non-standard pres-
sure cap will not allow the
recovery system to function
properly. Contact your dealer
for the correct replacement part.
6. Reinstall the access panel and secure the front box cover.
To Next Page
Loading...
