100
MAINTENANCE
Vehicle Immersion
If your vehicle has been totally submerged in water and it's impossible
to have it serviced before further operation, perform the following pro-
cedure.
If the vehicle stops while fully submerged, major engine damage can result if the
machine is not thoroughly inspected. Take the vehicle to your dealer before
starting the engine.
1. Move the vehicle out of the
water.
2. Turn the fuel valve off.
3. Drain any water found in the air box.
4. Remove the spark plug.
5. Loosen the carburetor drain screw and drain
the carburetor.
6. Turn the engine over several times using the
electric start.
To Next Page
Loading...
