60
CONTROLS AND FEATURES
Features
Rider Information Center
Diagnostic Mode
To enter the diagnostics mode:
1. Turn the key switch off and wait 20 seconds.
2. Set the park brake and shift the transmission to neutral.
3. Hold the mode/reverse override button as you turn the key switch
on.
The initial screen
displayed looks
similar to this
illustration and is
referring to the
software version
currently installed in
your machine. This
information is only
briefly displayed.
Use the
mode/reverse
override button to
toggle through the
diagnostic screens.
The first screen
indicates battery
voltage.
CAUTION
The diagnostic mode is for informational purposes only. Your
dealer is fully equipped with the knowledge and special tools
required to keep your machine running. Please return your ATV to
your dealer for all major repairs.
To Next Page
Loading...
Need help?
General
