EasyManua.ls Logo

Polaris Trail Boss 330 - Hand Brake

Polaris Trail Boss 330
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
FEATURES AND CONTROLS
Brake Fluid
Hand Brake
Check the brake fluid level in the
master cylinder before each use of
the vehicle. The master cylinder is
located on the left handlebar.
Maintain the fluid level 1/4" (6
mm) below the top edge of the
master cylinder. Do not overfill.
1. Position the vehicle on a level
surface. Make sure the han-
dlebars are straight.
2. View the fluid level through
the indicator window (eye) on
the top of the master cylinder. The eye will appear dark when the
fluid level is full. When fluid is low, the eye will be clear.
3. Add the recommended fluid as needed. Do not overfill.
Auxiliary Foot Brake
Check the brake fluid level frequently for the auxiliary brake system.
The brake fluid reservoir is located either under the seat or near the foot
brake. Maintain the fluid level between the minimum and maximum
marks. Do not overfill.
Master Cylinder
Indicator
Window

Table of Contents

Other manuals for Polaris Trail Boss 330

Related product manuals