EasyManuals Logo

Polaris Trail Boss 330 User Manual

Polaris Trail Boss 330
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #65 background imageLoading...
Page #65 background image
61
MAINTENANCE
Lubrication Guide
Check and lubricate all components at the intervals outlined in the Peri-
odic Maintenance Chart beginning on page 57. Items not listed in the
chart should be lubricated at the General Lubrication interval. See page
103 for the part numbers of POLARIS products.
The a-arms and lower control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
Perform these procedures more often for vehicles subjected to severe use.
Item Lube Method
Engine Oil PS-4 PLUS Performance
Synthetic 2W-50
See page 62.
Brake Fluid DOT 4 Only See page 31.
Drive Chain(s) O-ring chain lube or SAE
80/90
Lubricate.
Transmission Oil AGL PLUS Transmission
Fluid
See page 64.
Swing Arm
Bushings
Premium All Season
Grease
Locate fittings on swing arm and
grease with grease gun
Axle Housing
Tie Rod Ends Premium All Season
Grease
Lift boot, clean away dirt and grease,
apply fresh grease by hand and reas-
semble. Perform when suspension
action becomes stiff, or after washing.
Swing Arm
Bushings
Axle
Housing
Tie Rod Ends

Table of Contents

Other manuals for Polaris Trail Boss 330

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Trail Boss 330 and is the answer not in the manual?

Polaris Trail Boss 330 Specifications

General IconGeneral
BrandPolaris
ModelTrail Boss 330
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals