48
PRE-RIDE INSPECTIONS
Start the Engine and Check
n Engine Stop Switch
Check the auxiliary shut-off switch for proper operation. Push the
switch down to stop the engine. Pull it up to allow restarting.
n Lighting
Check the headlight (high and low beam), taillight, and brake light.
Replace burned out lamps before operating.
n Mirrors (if equipped)
Adjust the mirrors so they can be used to their full advantage.
n Operating Area
Before driving, check your surroundings. Be aware of obstacles and
make sure bystanders are a safe distance from the machine.
n Ignition Switch
Make sure the engine stops when the ignition switch is turned to OFF.
To Next Page
Loading...
