66
MAINTENANCE
Periodic Maintenance Interval Table
The following chart is a guide based on average riding conditions. You
may need to increase frequency based on riding conditions. When
inspection reveals the need for replacement parts, always use genuine
Polaris parts, available from your Polaris dealer.
I - Inspect (clean, adjust, tighten, lubricate, replace if necessary)
C - Clean R - Replace L - Lubricate
Item See
Page
Frequency
150 mi.
(240 km)
500 mi.
(800 km)
1000 mi.
(1600 km)
2000 mi.
(3200 km)
Pre-
Season
CLUTCH
Clutch Offset Alignment
(without belt)
86 II I
Drive Belt Condition 87 II II
Clutches (disassemble) 86 CC C
Belt Tension -- II II
Clutch Sheaves 90 II II
ENGINE
Engine Mounts -- II II
Recoil Rope 47 II II
Engine Mounting Plate -- II I
Engine Torque Stop 91 II II
Cylinder Head Bolts -- II I
Cylinder Base Nuts -- II I I
Ignition Timing BTDC -- II I
Spark Plug Condition 74 II I I I
Exhaust Pipe 80 II
Exhaust Retaining
Springs
80 II II
To Next Page
Loading...
Need help?
General
