Polaris TX Starfire - Suspension System Adjustments

SUSPENSION
The 1973 TX Starfire is equipped with a redesigned slide rail
system. This suspension is basically the same as used on other
Polaris models. There are two (2) major adjustments on this
system. They
are as follows:
1. Rear springs have two (2) adjustments for driver weight.
For drivers between 100 - 160 pounds,
put the springs
in the
lowest position; for drivers 160 pounds and over,
put the springs in the top position (refer to item no. 1).
2. Front springs are adjustable by tightening or loosening
the adjustment nuts on the springs. Adjust these for track
or surface condition by applying or decreasing the amount
of pressure on the front torque arm (refer to item no. 2).
ITEM #2
ITEM #1
25