EasyManuals Logo
Home>Polaris>Offroad Vehicle>Widetrak LX

Polaris Widetrak LX User Manual

Polaris Widetrak LX
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
40
PRE-RIDE INSPECTIONS
Before Starting the Engine
n Hydraulic Brakes
Properly functioning brakes are critical to your safety. Always check the
following items to assure proper operation before starting the engine.
Brake Lever Travel
Squeeze the brake lever. It should
move no closer to the handgrip
than 1/2 inch (1.3 cm). A smaller
distance indicates low brake fluid
level or air in the hydraulic sys-
tem. See pages 78-79 or see your
dealer for service.
Lever Feel
If the brake lever feels “spongy” when squeezed, check the brake fluid
level and condition. Also check for the presence of air in the fluid sys-
tem. See pages 78-79 or see your dealer for service.
Replace brake fluid at least every two years. We recommend the use of
Polaris DOT 4 high temperature brake fluid. See page 105 for the part
numbers of Polaris products.
WARNING
Continued use of “spongy” brakes may cause a complete loss of brakes,
which could result in serious injury or death. Always have the brakes serviced
at the first sign of sponginess.
1/2 inch (1.3 cm)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Widetrak LX and is the answer not in the manual?

Polaris Widetrak LX Specifications

General IconGeneral
BrandPolaris
ModelWidetrak LX
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals