87
MAINTENANCE
Clutch System
To r q u e S t o p
Periodically check torque stop
clearance. With clutches in
proper alignment, the torque stop
clearance should be .010-.030
inch (.25-.75 mm) from the
engine case.
Adjust if necessary, and lock the
jam nut.
To o l K i t
A tool kit is included with each machine for emergency and routine
maintenance. Always keep the tool kit with the snowmobile.
Chain Tension
Maintain the proper chain tension as outlined on page 76.
Fall Tune-Up
For maximum performance, arrange for a fall service tune-up with your
Polaris dealer.
To Next Page
Loading...
