27
Picture menu
picture mode
Adjust picture mode to change picture appearance.
Press ◄ / ► button to select(Standard / Dynamic / Mild / User/Power Saving).
Note:The brightness,contrast,color, tint and sharpness are only available in User
mode,you can adjust as you like.
Standard Produces a highly defined image in a normally lit room.
Dynamic Produces a highly defined image in a brightly lit room.
Mild Produces a highly defined image in a mild lit room.
Power Saving Saving Save energy.
User Select to customize picture settings.
Press MENU to enter the main menu, Press ◄ / ►button to select.
Press ENTER to enter.
Press MENU again to exit or back to parent menu.
Press ▼ / ▲ button to select among Picture Mode
/Brightness/ Contrast / Color/ Tint / Sharpness /
Color Temperature/Advanced Settings.
Press ENTER to enter.
Press ◄ / ► button to adjust.
Press MENU again or back to parent menu.
Brightness
Adjust the visual perception output of the entire picture, it will effect the
iuminousness of the picture.
Press ◄ / ► button to adjust.
To Next Page
Loading...
Need help?
General
