To
use
the
camera:
1.
Raise
the electronic flash
Grip the sides of the flash unit.
Swing the flash unit up
to
snap
it
in
place.
The flash will fully charge,
automati-
cally,
in
about 3 seconds every time
you:
• Load film into the camera when the
flash
un
it
is
raised .
• Raise the flash unit when there is
film already
in
the camera.
•
Take
a picture.
•
Or,
when you simply touch the
shutter button.
The flash is designed to be used for
every picture outdoors and indoors.
When you are not using the camera,
lower the flash unit.
It
will protect the
lens and lock the shutter button.
5
To Next Page
Loading...
Need help?
General
