Polaroid 600 series

2. Load the film
Use only Polaroid 600 color film.
Push the latch
forward.
Hold the film pack by its edges only,
as shown, and slide it all the way into
the camera. Close the film door. As
soon as
it is closed:
• The camera will eject the film cover.
6
• The red light on the back of the flash
unit will come on to show the flash
is
charging. In about 3 seconds, the
green light will come on
to show the
flash
is ready to fire.
To remove an empty fi lm pack, pull
the
co lored tab on the film pack .