Polaroid 65 Series - BASIC OPERATION; Channel, Volume, and Source Control

15
MAKE SURE ALL THE EQUIPMENTS AND POWER PLUG ARE CONNECTED PROPERLY
AND THE UNIT IS SET IN CORRECT MODE BEFORE KINDS OF OPERATIONS.
BASIC OPERATION
- Press POWER button on the unit or remote control to power ON the unit ; press it again
to power OFF (standby mode) the unit (indicator will glow red).
- Press SOURCE button on the remote control to switch the unit to Composite or HDMI
mode.
SELECT DESIRED PROGRAM
1. Press CH+ button to play next channel.
2. Press CH- button to play previous channel.
3. Press number buttons on remote control directly to select desired program
VOLUME CONTROL
- Press VOL+ or VOL- to adjust the level of current volume. Available range: 0-100
MUTE CONTROL
- Press MUTE button to mute the sound, press it again to turn on the sound.
SOURCE SETTING
- Press SOURCE button on the remote control to display the sources list.
- Press UP or DOWN navigation button to select desired input source, and then press
OK button to confirm selection.
Available options: TV,Composite, HDMI.