21
type. Antenna: Set the signal type to antenna. When set to Antenna, theTV can receive analog and
digital (DVB-T/DVB-T2) broadcasting signals.
Cable: :Set the signal type to cable. When set to Cable, theTV can receive analog and QAM
broadcasting signals.
Auto Channel Update
Parental controls: Press ▼ ▲ button to select the option then press OK button to enter the sub-menu.
Audio Channel: press ▼ ▲button to select the option then press OK button to enter the sub-menu.
Open source licenses: press▼ ▲button to select the option then press OK button to enter the sub-
menu.
Antenna
1. Menu->Settings->Channel->Channel Installation Mode
enter, choose Antenna or cable.
2. Enter Menu-> Settings -> Channel -> Channels.
3. Channel Scan directly enters the ATV+DTV automatic search platform interface of Antenna.
Update scan: Re-automatically search for frequency points outside the station.
To Next Page
Loading...
Need help?
General
