Date/Time Menu
When you capture an image with your camera, the image will include a time stamp with the date
and time that the image was taken.
The Date/Time menu allows you to set your camera’s date and time as desired. You can also
disable the timestamp for future images that will be taken with your camera.
On – The timestamp will appear on photos taken
Off – The date stamp will not appear on photos taken
To Enable/Disable the Timestamp:
1) Press the MENU/OK button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll and select the ‘Date/Time’ menu.
3) Press the UP or DOWN button to highlight ON or OFF.
ON > Displays the Date & Time on the captured image.
OFF > Does not display the Date & Time on the captured image.
4) Press the MENU/OK button to confirm and select the highlighted menu option.
A selected option icon appears on the selected item.
5) To continue within the menus and select a different menu option:
Press the LEFT or RIGHT button to select the next menu item.
6) To exit the menu view:
Press the MODE button to exit the menu and return to your previous mode.
To Set the Date and Time:
1) Press the MENU/OK button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll and select the ‘Date/Time’ menu.
3) Press the UP or DOWN direction control buttons to scroll through the menu options and
highlight the ‘Date Setup’ menu option.
4) Press the MENU/OK button to confirm and enter the ‘Date Setup’ settings screen.
5) Scroll through the window with the RIGHT and LEFT navigation buttons. For each field in
the menu, use the UP and DOWN navigation buttons to set the current time and date.
6) Press the MODE button to exit the menu and return to your previous screen.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
