The ‘Metering’ setting will affect how your camera focuses when capturing an image. Depending
on your selection, the camera will be more sensitive to focusing on particular areas in the display
and adjust the image color and lighting accordingly.
Center – Averages the light metered from the entire frame, but giving greater weight to the
subject in the center
Multi – Used in standard conditions the camera divides and adjusts the settings of the image into
several zones for light metering such as complex light conditions, position of subject, brightness,
background, direct light and scenes
Spot – Meters the area within the spot point frame at the center of the LCD to set the exposure
on the subject in the center of the monitor.
1) Press the SET button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll and select the ‘Metering’ menu.
3) Press the UP or DOWN button to highlight a specific option.
4) Press the SET button to confirm and select the highlighted menu option.
A selected option icon appears on the selected item.
5) To continue within the menus and select a different menu option:
Press the LEFT or RIGHT button to select the next menu item.
6) To exit the menu view:
Press the MODE button to exit the menu and return to your previous mode.
An icon reflecting your selection is displayed on the LCD screen.
You can select your camera’s language setting by selecting the desired language from the
‘Language’ menu.
1) Press the SET button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll and select the ‘Language’ menu.
3) Press the UP or DOWN button to highlight a specific option.
4) Press the SET button to confirm and select the highlighted menu option.
To Next Page
Loading...
Need help?
General
